Timers not in time
-
@aidan-oxley
"Not their primary income source" might be an understatement.
As to the rest, I don't see why you continue to make apologies for a version that makes iPads physically hot to touch, instigates thermal throttling and flattens batteries at never before seen rates... in the static code (behaviour) editor. Let alone the stuttering in the runtime.
The fix has been provided. Spelt out. Not even difficult. Just copy paste from someone else that discovered the problem and fixed it.
-
@Deeeds fix is very difficult, actually. Since a lot of our app runs on timers, everything will need to be tested. Just because its a "quick" code fix (it's also not a quick fix), does not mean its a quick fix for everything.
As for timers being slightly inaccurate, I think its because time is based off of frames, so if you're doing some pretty time accurate things, they need to be multiples of your fps eg 1/20, 1/60, 1/30 etc.
-
Also, updates are slow because our app is in both a really stable state and a really broken state. For our more hardcore users (you guys), we're fixing pretty much all the issues at once because they all relate to each other, while making sure that the app stays stable for everyone else.
-
@deeeds idk why you like to attack them so much.
-
We're also working on Hyperpad full time. But it’s hard. There’s a reason why we're the only WYSIWYG game creator on iPad.
-
@hamed when I let the project with them timers run for long enough, ALL of the timers have a different number. There's a 0s timer, 1s timer, 0.5s timer, 0.25s timer, 0.2s timer and a 0.1s timer. All of those are divisible by 60 (1 frame, 60 frames, 30 frames, 15 frames, 12 frames, 6 frames respectively).
-
The smaller the number in the timer, the lower their number is after leaving it for a while (except 0s, it ends up with the highest). Timers are adding to a label their own time (0.1s timer adds 0.1, 0.2s adds 0.2 etc).
-
@hamed Bullshit.
The primary fix (independence from CADisplayLink) isolates you from the problems without creating other obligations and changes nothing of significance about cocos2D.
I might even know this to be fact.
I know you do.
-
@aidan-oxley said in Timers not in time:
when I let the project with them timers run for long enough, ALL of the timers have a different number. There's a 0s timer, 1s timer, 0.5s timer, 0.25s timer, 0.2s timer and a 0.1s timer. All of those are divisible by 60 (1 frame, 60 frames, 30 frames, 15 frames, 12 frames, 6 frames respectively)
And this is only one part of the problem.If you have multiple timers, and they all do your "rounding" @hamed, then every single one must be manually forcibly reset, without knowing which one is the problem.
This, the lack of functions and references generally indicate you don't care about your (very few) users.
Stop writing. Just fix it. Update it. Then go play with your efforts to become virtual currency "playas".
-
@hamed said in Timers not in time:
We're also working on Hyperpad full time. But it’s hard. There’s a reason why we're the only WYSIWYG game creator on iPad.
You're not the only WYSIWYG game creator on iPad. You're just the only one that never gets around to updating. The other significant one manages to create up to date documentation and samples and fixes, and updates to 3D and ARKit, despite having a programming team of the exact same size.... because they ACTUALLY work on it more than a little. Not full time, but more than you.
-
@aidan-oxley No attack, yet. Just observation, commentary and critique. When you know the difference between those things and an actual attack, you'll be ready for a career in media. If you believe this is toxicity or need a safe space, that's on you.
-
That's pretty creepy. What we do on our own time is our own business.
@Aidan-Oxley I've downloaded your project and will take a look
-
@deeeds There's another WYSIWYG game creator on iPad? Maybe you should delete hyperPad and go download that one, and then you won't have to complain so much. Have you never seen a hyperPad update? They do get around to it, they just take a while.
-
@aidan-oxley try Codea and Construct 3
Neither offer Chipmunk2D and cocos2D rendering, but they're both very good at what they do, and far better in just about every way, other than the above mentioned two things.
-
@aidan-oxley In direct answer, no. Have not seen an update in the time I've been using hyperPad.
-
@hamed Just a lucky coincident. Your brother and I know someone in common and they share an interest. I spent some time consulting on their desire to create an ICO based on a shared proof of work concept that was pretty cool. Then they got carried away effectively gambling on existing virtual currencies... which seems to be a common distraction.
-
@hamed I'm very keen to see a proof of work concept come to reality that's not parasitical
and/or inefficient, wasteful use of computing and/or energy. Current forms of "mining" are, in my view, legacy guff. The ideas of shared ledger DBs have been proven, now it's time to find ways to make any virtual currency's distribution mechanisms generally beneficial rather than deliberately exclusive via "crypto mining" and/or other wasteful, purposeless means. It is an interesting space, the idea that a currency's means of distribution and creation be beneficial to its inherent purpose as a store and transfer of value. -
@deeeds Well just so you know hyperPad updates do actually exist, they are rare, and have loads of content. What's so good about chipmunk and cocos that makes you choose hyperPad over Codea or Construct 3? You clearly have a LOT of issues with hyperPad.
-
@aidan-oxley said in Timers not in time:
@deeeds Well just so you know hyperPad updates do actually exist, they are rare, and have loads of content. What's so good about chipmunk and cocos that makes you choose hyperPad over Codea or Construct 3? You clearly have a LOT of issues with hyperPad.
@Aidan-Oxley Mind if I edit that last bit there? Thanks! Here goes- You clearly have a LOT of issues in life.
Oh, so much better! -
@itap-development said in Timers not in time:
@aidan-oxley said in Timers not in time:
@deeeds Well just so you know hyperPad updates do actually exist, they are rare, and have loads of content. What's so good about chipmunk and cocos that makes you choose hyperPad over Codea or Construct 3? You clearly have a LOT of issues with hyperPad.
@Aidan-Oxley Mind if I edit that last bit there? Thanks! Here goes- You clearly have a LOT of issues in life.
Oh, so much better!Oh he definitely has issues. Looks like he's stalking me and Hamed online. Apparently our hobbies and what we do in our free time is now his business.
Deeeds, any suggestions on what I should have for dinner tonight? At this point I'm sure you know what's in my fridge too. 🤣
Also, once again leave it to Deeeds to take a topic incredibly off course making it harder for us to find issues and fix them. Then he questions why updates take so long.
